Getting started with Libjitsi: How to get example AVTransmit2 & AVReceive2 to work locally
Not sure how to tell if AVReceive2 and AVTransmit2 examples are working locally.
I’m just getting started with Libjitsi and I’m trying to get the AVTransmit2 and AVReceive2 examples to work locally. I’ve cloned the project, and I’m passing in to following arguments to each program (just following the example):
AVTransmit2: -Drun.example.arg.line="–remote-host=127.0.0.1 --remote-port-base=10000"
AVReceive2: -Drun.example.arg.line="–local-port-base=10000 --remote-host=<my_public_IP_address> --remote-port-base=5000"
Are those the right arguments to use if I’m just transmitting from my laptop to my laptop?
Also, instead of initializing all media types, I’m just doing MediaType.AUDIO for now.
The transmitter prints out it’s transmitting for 60 seconds, so I believe it’s running properly:
INFO: audio codec/freq: PCMU/8000 Hz
Dec 18, 2018 2:18:33 PM org.jitsi.util.LoggerImpl log
INFO: audio remote IP/port: 127.0.0.1/10000
Start transmission for 60 seconds…
The receiver seems to be running too:
Dec 18, 2018 2:18:57 PM org.jitsi.util.LoggerImpl log
INFO: Warming up SecureRandom finished.
Should I expect to be able to talk into my microphone, and have it come out my speakers?
audio audio-streaming jitsi
asked Jan 2 at 19:07
user3426689user3426689
11
add a comment |
Not sure how to tell if AVReceive2 and AVTransmit2 examples are working locally.
I’m just getting started with Libjitsi and I’m trying to get the AVTransmit2 and AVReceive2 examples to work locally. I’ve cloned the project, and I’m passing in to following arguments to each program (just following the example):
AVTransmit2: -Drun.example.arg.line="–remote-host=127.0.0.1 --remote-port-base=10000"
AVReceive2: -Drun.example.arg.line="–local-port-base=10000 --remote-host=<my_public_IP_address> --remote-port-base=5000"
Are those the right arguments to use if I’m just transmitting from my laptop to my laptop?
Also, instead of initializing all media types, I’m just doing MediaType.AUDIO for now.
The transmitter prints out it’s transmitting for 60 seconds, so I believe it’s running properly:
INFO: audio codec/freq: PCMU/8000 Hz
Dec 18, 2018 2:18:33 PM org.jitsi.util.LoggerImpl log
INFO: audio remote IP/port: 127.0.0.1/10000
Start transmission for 60 seconds…
The receiver seems to be running too:
Dec 18, 2018 2:18:57 PM org.jitsi.util.LoggerImpl log
INFO: Warming up SecureRandom finished.
Should I expect to be able to talk into my microphone, and have it come out my speakers?
audio audio-streaming jitsi
asked Jan 2 at 19:07
user3426689user3426689
11
add a comment |
Not sure how to tell if AVReceive2 and AVTransmit2 examples are working locally.
I’m just getting started with Libjitsi and I’m trying to get the AVTransmit2 and AVReceive2 examples to work locally. I’ve cloned the project, and I’m passing in to following arguments to each program (just following the example):
AVTransmit2: -Drun.example.arg.line="–remote-host=127.0.0.1 --remote-port-base=10000"
AVReceive2: -Drun.example.arg.line="–local-port-base=10000 --remote-host=<my_public_IP_address> --remote-port-base=5000"
Are those the right arguments to use if I’m just transmitting from my laptop to my laptop?
Also, instead of initializing all media types, I’m just doing MediaType.AUDIO for now.
The transmitter prints out it’s transmitting for 60 seconds, so I believe it’s running properly:
INFO: audio codec/freq: PCMU/8000 Hz
Dec 18, 2018 2:18:33 PM org.jitsi.util.LoggerImpl log
INFO: audio remote IP/port: 127.0.0.1/10000
Start transmission for 60 seconds…
The receiver seems to be running too:
Dec 18, 2018 2:18:57 PM org.jitsi.util.LoggerImpl log
INFO: Warming up SecureRandom finished.
Should I expect to be able to talk into my microphone, and have it come out my speakers?
audio audio-streaming jitsi
asked Jan 2 at 19:07
user3426689user3426689
11
Not sure how to tell if AVReceive2 and AVTransmit2 examples are working locally.
I’m just getting started with Libjitsi and I’m trying to get the AVTransmit2 and AVReceive2 examples to work locally. I’ve cloned the project, and I’m passing in to following arguments to each program (just following the example):
AVTransmit2: -Drun.example.arg.line="–remote-host=127.0.0.1 --remote-port-base=10000"
AVReceive2: -Drun.example.arg.line="–local-port-base=10000 --remote-host=<my_public_IP_address> --remote-port-base=5000"
Are those the right arguments to use if I’m just transmitting from my laptop to my laptop?
Also, instead of initializing all media types, I’m just doing MediaType.AUDIO for now.
The transmitter prints out it’s transmitting for 60 seconds, so I believe it’s running properly:
INFO: audio codec/freq: PCMU/8000 Hz
Dec 18, 2018 2:18:33 PM org.jitsi.util.LoggerImpl log
INFO: audio remote IP/port: 127.0.0.1/10000
Start transmission for 60 seconds…
The receiver seems to be running too:
Dec 18, 2018 2:18:57 PM org.jitsi.util.LoggerImpl log
INFO: Warming up SecureRandom finished.
Should I expect to be able to talk into my microphone, and have it come out my speakers?
audio audio-streaming jitsi
audio audio-streaming jitsi
asked Jan 2 at 19:07
user3426689user3426689
11
asked Jan 2 at 19:07
user3426689user3426689
11
edited Jan 3 at 21:03
user3426689
asked Jan 2 at 19:07
user3426689user3426689
11
asked Jan 2 at 19:07
user3426689user3426689
11
asked Jan 2 at 19:07
user3426689user3426689
11
11
add a comment |
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f54011866%2fgetting-started-with-libjitsi-how-to-get-example-avtransmit2-avreceive2-to-wo%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f54011866%2fgetting-started-with-libjitsi-how-to-get-example-avtransmit2-avreceive2-to-wo%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
