run a python script on raspberry pi turned on
I am working on raspberry pi 3 about 3 months , I had a problem when I started working with it.
I couldn't find an efficient and safe way to run a python script on raspberry when it turns on(without monitor and mouse and keyboard).At the moment I have added "$sudo run myscript.py &" at /etc/profile but sometimes when I turn it on my script doesn't run until I connect monitor and mouse and keyboard to it and run the script with GUI and after that it works fine (again without mouse and keyboard).
I want to know is there any solution that I will be sure my script will run after I turn raspberry pi on?
Thanks a lot
python linux raspberry-pi
asked Jan 1 at 10:56
A.RishehA.Risheh
14
add a comment |
I am working on raspberry pi 3 about 3 months , I had a problem when I started working with it.
I couldn't find an efficient and safe way to run a python script on raspberry when it turns on(without monitor and mouse and keyboard).At the moment I have added "$sudo run myscript.py &" at /etc/profile but sometimes when I turn it on my script doesn't run until I connect monitor and mouse and keyboard to it and run the script with GUI and after that it works fine (again without mouse and keyboard).
I want to know is there any solution that I will be sure my script will run after I turn raspberry pi on?
Thanks a lot
python linux raspberry-pi
asked Jan 1 at 10:56
A.RishehA.Risheh
14
Stack Overflow is a site for programming and development questions. You should use another site on the Stack Exchange network for this question.
– jww
Jan 1 at 14:37
add a comment |
I am working on raspberry pi 3 about 3 months , I had a problem when I started working with it.
I couldn't find an efficient and safe way to run a python script on raspberry when it turns on(without monitor and mouse and keyboard).At the moment I have added "$sudo run myscript.py &" at /etc/profile but sometimes when I turn it on my script doesn't run until I connect monitor and mouse and keyboard to it and run the script with GUI and after that it works fine (again without mouse and keyboard).
I want to know is there any solution that I will be sure my script will run after I turn raspberry pi on?
Thanks a lot
python linux raspberry-pi
asked Jan 1 at 10:56
A.RishehA.Risheh
14
I am working on raspberry pi 3 about 3 months , I had a problem when I started working with it.
I couldn't find an efficient and safe way to run a python script on raspberry when it turns on(without monitor and mouse and keyboard).At the moment I have added "$sudo run myscript.py &" at /etc/profile but sometimes when I turn it on my script doesn't run until I connect monitor and mouse and keyboard to it and run the script with GUI and after that it works fine (again without mouse and keyboard).
I want to know is there any solution that I will be sure my script will run after I turn raspberry pi on?
Thanks a lot
python linux raspberry-pi
python linux raspberry-pi
asked Jan 1 at 10:56
A.RishehA.Risheh
14
asked Jan 1 at 10:56
A.RishehA.Risheh
14
asked Jan 1 at 10:56
A.RishehA.Risheh
14
asked Jan 1 at 10:56
A.RishehA.Risheh
14
asked Jan 1 at 10:56
A.RishehA.Risheh
14
14
Stack Overflow is a site for programming and development questions. You should use another site on the Stack Exchange network for this question.
– jww
Jan 1 at 14:37
add a comment |
Stack Overflow is a site for programming and development questions. You should use another site on the Stack Exchange network for this question.
– jww
Jan 1 at 14:37
Stack Overflow is a site for programming and development questions. You should use another site on the Stack Exchange network for this question.
– jww
Jan 1 at 14:37
Stack Overflow is a site for programming and development questions. You should use another site on the Stack Exchange network for this question.
– jww
Jan 1 at 14:37
add a comment |
2 Answers
2
active
oldest
votes
You will want to setup a service and user sudo service <my_service> [start, stop, restart] to get it working on startup. See here for reference.
answered Jan 1 at 10:59
Charles DrotarCharles Drotar
1217
add a comment |
The /etc/profile is executed when new shell session in being started, so unless you start at least single shell session your script will not be run. Moreover it will be terminated when session stops, and if you start multiple sessions then the script will also be started for each session, which is probably not what you want.
Depending on your init system you would need to create SysVinit or systemd service. Assuming you use systemd based distro (which is currently default for most Linux distributions) you need to do following:
Step 1: Place your script in location from which it will be executed by service. For example /usr/local/bin/ may be good choice.
Step 2: Create service file. Assuming you want to name it myscript.service, create file at following path /etc/systemd/system/myscript.service with following content:
[Unit]
Description=myscript
[Service]
ExecStart="/usr/bin/python /usr/local/bin/myscript.py"
[Install]
WantedBy=multi-user.target
Step 3: Reload systemd daemon and enable your service:
systemctl daemon-reload
systemctl enable myscript
Now after you restart your system, your service should be automatically started. You can verify that using command systemctl status myscript, which returns service status.
answered Jan 1 at 14:28
Robert BaldygaRobert Baldyga
7715
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53994879%2frun-a-python-script-on-raspberry-pi-turned-on%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
You will want to setup a service and user sudo service <my_service> [start, stop, restart] to get it working on startup. See here for reference.
answered Jan 1 at 10:59
Charles DrotarCharles Drotar
1217
add a comment |
You will want to setup a service and user sudo service <my_service> [start, stop, restart] to get it working on startup. See here for reference.
answered Jan 1 at 10:59
Charles DrotarCharles Drotar
1217
add a comment |
You will want to setup a service and user sudo service <my_service> [start, stop, restart] to get it working on startup. See here for reference.
answered Jan 1 at 10:59
Charles DrotarCharles Drotar
1217
You will want to setup a service and user sudo service <my_service> [start, stop, restart] to get it working on startup. See here for reference.
answered Jan 1 at 10:59
Charles DrotarCharles Drotar
1217
answered Jan 1 at 10:59
Charles DrotarCharles Drotar
1217
answered Jan 1 at 10:59
Charles DrotarCharles Drotar
1217
answered Jan 1 at 10:59
Charles DrotarCharles Drotar
1217
1217
add a comment |
add a comment |
The /etc/profile is executed when new shell session in being started, so unless you start at least single shell session your script will not be run. Moreover it will be terminated when session stops, and if you start multiple sessions then the script will also be started for each session, which is probably not what you want.
Depending on your init system you would need to create SysVinit or systemd service. Assuming you use systemd based distro (which is currently default for most Linux distributions) you need to do following:
Step 1: Place your script in location from which it will be executed by service. For example /usr/local/bin/ may be good choice.
Step 2: Create service file. Assuming you want to name it myscript.service, create file at following path /etc/systemd/system/myscript.service with following content:
[Unit]
Description=myscript
[Service]
ExecStart="/usr/bin/python /usr/local/bin/myscript.py"
[Install]
WantedBy=multi-user.target
Step 3: Reload systemd daemon and enable your service:
systemctl daemon-reload
systemctl enable myscript
Now after you restart your system, your service should be automatically started. You can verify that using command systemctl status myscript, which returns service status.
answered Jan 1 at 14:28
Robert BaldygaRobert Baldyga
7715
add a comment |
The /etc/profile is executed when new shell session in being started, so unless you start at least single shell session your script will not be run. Moreover it will be terminated when session stops, and if you start multiple sessions then the script will also be started for each session, which is probably not what you want.
Depending on your init system you would need to create SysVinit or systemd service. Assuming you use systemd based distro (which is currently default for most Linux distributions) you need to do following:
Step 1: Place your script in location from which it will be executed by service. For example /usr/local/bin/ may be good choice.
Step 2: Create service file. Assuming you want to name it myscript.service, create file at following path /etc/systemd/system/myscript.service with following content:
[Unit]
Description=myscript
[Service]
ExecStart="/usr/bin/python /usr/local/bin/myscript.py"
[Install]
WantedBy=multi-user.target
Step 3: Reload systemd daemon and enable your service:
systemctl daemon-reload
systemctl enable myscript
Now after you restart your system, your service should be automatically started. You can verify that using command systemctl status myscript, which returns service status.
answered Jan 1 at 14:28
Robert BaldygaRobert Baldyga
7715
add a comment |
The /etc/profile is executed when new shell session in being started, so unless you start at least single shell session your script will not be run. Moreover it will be terminated when session stops, and if you start multiple sessions then the script will also be started for each session, which is probably not what you want.
Depending on your init system you would need to create SysVinit or systemd service. Assuming you use systemd based distro (which is currently default for most Linux distributions) you need to do following:
Step 1: Place your script in location from which it will be executed by service. For example /usr/local/bin/ may be good choice.
Step 2: Create service file. Assuming you want to name it myscript.service, create file at following path /etc/systemd/system/myscript.service with following content:
[Unit]
Description=myscript
[Service]
ExecStart="/usr/bin/python /usr/local/bin/myscript.py"
[Install]
WantedBy=multi-user.target
Step 3: Reload systemd daemon and enable your service:
systemctl daemon-reload
systemctl enable myscript
Now after you restart your system, your service should be automatically started. You can verify that using command systemctl status myscript, which returns service status.
answered Jan 1 at 14:28
Robert BaldygaRobert Baldyga
7715
The /etc/profile is executed when new shell session in being started, so unless you start at least single shell session your script will not be run. Moreover it will be terminated when session stops, and if you start multiple sessions then the script will also be started for each session, which is probably not what you want.
Depending on your init system you would need to create SysVinit or systemd service. Assuming you use systemd based distro (which is currently default for most Linux distributions) you need to do following:
Step 1: Place your script in location from which it will be executed by service. For example /usr/local/bin/ may be good choice.
Step 2: Create service file. Assuming you want to name it myscript.service, create file at following path /etc/systemd/system/myscript.service with following content:
[Unit]
Description=myscript
[Service]
ExecStart="/usr/bin/python /usr/local/bin/myscript.py"
[Install]
WantedBy=multi-user.target
Step 3: Reload systemd daemon and enable your service:
systemctl daemon-reload
systemctl enable myscript
Now after you restart your system, your service should be automatically started. You can verify that using command systemctl status myscript, which returns service status.
answered Jan 1 at 14:28
Robert BaldygaRobert Baldyga
7715
answered Jan 1 at 14:28
Robert BaldygaRobert Baldyga
7715
answered Jan 1 at 14:28
Robert BaldygaRobert Baldyga
7715
answered Jan 1 at 14:28
Robert BaldygaRobert Baldyga
7715
7715
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53994879%2frun-a-python-script-on-raspberry-pi-turned-on%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Stack Overflow is a site for programming and development questions. You should use another site on the Stack Exchange network for this question.
– jww
Jan 1 at 14:37